V8Thunder technical rules 2025

1. Descriptions

1.1 Approved cars: Cars supplied by Performance AutoMotive Scandinavian AB. Approved models: Chevrolet Camaro 5th and 6th version, Ford Mustang 5th and 6th version, Dodge Challenger 3rd version, with chassis marked either CCR mk1 or mk2 and MB C63 AMG and Audi RS5, with DTC versions.

1.2 Restrictions: Changes or deviations in cars other than those in accordance with these rules are strictly prohibited except with express permission from the SM Sport Group. Permission for a change or exception is sought in a separate additional regulation. A permitted change may not result in a prohibited change. The only permitted changes are normal adjustment, maintenance and replacement of damaged parts. Damaged parts may only be replaced with those classified parts that are listed in appendices 1.1, 1.2, 1.3, 1.4 and 1.5. Damaged parts in the body or body parts, paintings and stickers must be repaired and / or replaced as soon as possible after the competition. Participation in the competition with a damaged car will be decided by the class inspector after inspection.

2. Classification These rules are based on the CCR mk1 or CCR mk2 Workshop Manual and the spare parts classified by the car manufacturer HOWE in appendices 1.1 Chevrolet Camaro; 1.2 Ford Mustang; 1.3 Dodge Challenger; 1.4 MB C63 AMG and 1.5 Audi RS5.

3. Enforcement of the rules The enforcement of the rules is carried out in accordance with the rules of the Track-SM series. The SM series Technical category group must be consulted in the interpretation of these rules. Weight limits The minimum weight of the car with the driver is 1250 kilograms. If additional weights are used, they must be placed in a suitable weight box in appendices 1.1 and 1.2. Additional weights must be sealed in accordance with the appendix. The minimum weight refers to the weight during practice, qualifying and the race and includes the driver's weight. The car may be weighed at any time before, during or after practice, qualifying or the race and the weight of the car at the time of weighing must meet or exceed the minimum weight. All 6th edition bodies (Camaro & Mustang) are required to be equipped with two additional weights (total 12 kg) in the manner and location shown in the accompanying drawing to compensate for the lighter frame weight. One of these additional weights may also be placed on the other side of the car in the corresponding position. The scrutineers will seal the weights. A description of these weights can be found in appendices 1.1 and 1.2.

4. General

5.1 Engine
The only permitted engine is the LS3CC engine manufactured by GM's engine factory. PASAB is the only permitted supplier of new engines. The engines must be sealed. No work or action that requires breaking the seal is permitted. If one (3 seals on the engine) of the seals installed by PASAB / Ultra Motors / Kivinummi Racing, Hämeenkyrö is missing, the competitor's penalty will be decided by the competition director. If all engine seals are missing, the engine in question may not participate in the competition until after the engine has been inspected and resealed. The class inspector does not have the right to reseal the entire engine. All engine seals are the competitor's responsibility. The valve cover is not sealed. Ultra Motors and KivinummiRacing, Hämeenkyrö are the official engine maintenance providers and the only ones who have the right to refurbish, repair or maintain these engines. New spare engines can be supplied by PASAB Sweden, KivinummiRacing or Howe USA if required. The following parts are free: starter motor, clutch cover, thrust bearing, spark plugs, spark plug wires and oil filter. Safety cable for oil plugs – it is permitted to drill holes in the base of the oil plugs to ensure that the oil plugs stay in place as shown in the picture.

Engine Control Module (ECM)
The only approved ECM is the original GM LS3CC engine control module. (Electronic Control Module). The module in question is sealed. Connecting a computer or downloading files to or from the module is prohibited. Only the white wire from the ECM may be connected to the tachometer. The OBD connection is also sealed. Any modification of the ECM is prohibited. The V8 class inspector has free access to the ECM unit of each competitor. The V8 class inspector has the right to exchange the ECM units of all competitors between competitors / cars. The V8 class inspector has the right to examine and check the programming of the ECM unit. The V8 class inspector has the right to break / remove the seal of the OBD connection and re-seal the ECM unit after troubleshooting.

5.2 Electrical system
Battery: Optima model 34/78. PN 8004-250 Red Top Starting. Charger is free Transponder must be fitted to the correct pre-drilled holes in the front frame tube. A digital instrument cluster (dashboard / data logger type) may be installed. The battery ground cable must be connected to the car's central grounding point The battery power cable must be connected to the main power switch. The car's electrical wiring must be routed through the existing wiring holes in the body. Drilling new / additional holes is prohibited. Only the following sensors are permitted to be connected to the dashboard / data logger: G-force sensor The cabin interior temperature sensor must be installed inside the data logger box. Voltage measurement (volts) Engine RPM sensor Wheel speed sensor (only one sensor, mounted on the left front wheel) Lap time sensor Oil pressure and temperature sensor. Coolant temperature sensor. Lambda sensor Brake pressure sensor Steering angle sensor Throttle position sensor Rear and transmission oil temperature sensor Tire pressure sensor Tire temperature sensors Fuel pressure sensor. GPS module.

5.3 Exhaust system
Exhaust manifolds and Y-branches CCR Mk1/ CCR Mk2 according to appendices 1.1, 1.2 and 1.3. CAMCUP13 muffler Ferrita. CAM09001 catalytic converter Ferrita. Mandatory in Finnish competitions! H2111C exhaust system end, so-called old version, only used outside Sweden. Noise limit 95db (only used in Sweden) according to SBF Technical Regulations (TR4). If the permitted noise limit (db) varies between different countries, the rule is adjusted to the noise limit (db) of the country organizing the competition. In Finland 110db The use of heat radiation reducing tape is permitted in the exhaust system in the following two places: To reduce heat radiation to the alternator, heat tape may be installed on the exhaust curve of the 1st cylinder as shown in Figure 1. Figure 1 In an attempt to reduce the amount of heat radiation to the fuel tank, heat tape may be installed as shown in Figure 2: Figure 2 In an attempt to reduce the heat radiation from the exhaust manifold to the alternator, it is permitted to direct cooling air to the alternator as shown in the following figure. Only the following parts are permitted in the exhaust system for this purpose: PN RE200 Air Naca Duct and PN RE2031 Air Hose Figure 3 If a long exhaust system is installed on the car, it may be thermally insulated as shown in Figure 4 to reduce the risk of burns to mechanics. Figure 4

5.4 Installing the front piece on the front fenders
The original front and front fender mounting parts may be replaced with other types. The mounting parts are free with the following exceptions: The mountings must be made either by screwing or riveting to the original fiberglass or plastic edges of the front fenders. The connection between the front piece and the front fenders from the outside is not permitted.

5.5 Fuel
Generally, 95E or 98E fuel sold at gas stations in Finland is permitted. In addition to the above, RE85 ethanol sold at gas stations is also permitted for carburetor engines.

5.6 Upper control arm mounting
The PN 2213907 (Precision Max Upper A-Frame) upper control arm must be bolted to the body as follows: the connection must contain a bolt, a spacer, a spacer and a metal lock nut. Bolt type: UNC ½" x 2 ½". Lock nut UNC ½", thread depth 7/16 (11mm). Steel spacer (washer) t = 3/32" (2.38mm). The thickness of the installed camber plates must not exceed 16.1 mm.

6 Transmission

6.1 Transmission
Four-speed G-Force PN GF4A - G101A Ratios: 1st = 2.45:1 2nd = 1.57:1 3rd = 1.22:1 4th = 1.00:1 Reverse = 1.93:1

6.2 Gearshift mechanism
The gearshift mechanism is free, but the H-diagram must be retained and the mechanism must fit the original transmission tunnel opening.

6.3 Rear Axle
Model CCR Mk1-Winters, according to appendix 1.1, 1.2,1.3. Type "Ford 9". Ratio 3.25:1 or 3.50:1 Differential: Quaife ATB. Toe-in and camber can be adjusted within the following limits: Toe-in = max +/- 2 mm / side Camber = max of + / - 0.3 degrees.

6.4 Propeller shaft
Aluminum: PN QM188395 Steel: PN 243950

6.5 Clutch master cylinder
The following parts manufactured by Howen and Tilton are freely available: Howe PN 524312, Howe PN 524314, Howe PN 524316, TLT PN 74-875, TLT 74-1000.

6.6 Clutch housing SFI certified, complete clutch housing. All parts included in the clutch housing must be installed. Modifications to the clutch housing are permitted as shown in the following pictures: cutting the lower edge of the housing to increase ground clearance; elliptical holes on the edges of the center hole may be modified as shown in the picture to facilitate removal / installation of the gearbox when the release bearing is installed. Other modifications to the clutch housing are prohibited.

7.0 Wheels

7.1 Rims Permitted rim 18x10" ET minimum 35, one-piece only. Minimum weight 9Kg – magnesium prohibited. For the 2025 season, a separate regulation for rain tires and their rims. Maximum size 9 x 17". Minimum offset ET35. Metallic, but not magnesium. The hub must not extend beyond the edge of the rim. The use of longer bolts in the front hub is permitted. The original front hub bolt - PN 20612 - can be replaced with a longer rear hub bolt, PN 20613. The wheel hub must remain inside the rim edge line.

7.2 Tires
V8 Thunder SM 2025 according to the competition rules

8.0 Brakes
Original CCR Mk1/Mk 2 according to appendices 1.1, 1.2, 1.3. Brake pad wear can be compensated by adding a spacer between the brake pad backing and the caliper piston. The manufacture and shape of the spacers are free, but their material must be steel or aluminum. The material of the brake pads - RE221R/RE221L - can be modified according to the following alternative methods, shown in the picture: Option 1: Drill three 30 mm holes in the plate as shown in the picture or Option 2: Cut the plate in the area marked in red. When measuring the hole in the brake plate, the outer edge and inner edge are max. 50mm To protect the brake and clutch cylinder from the heat radiation of the exhaust manifold, a shield may be used PN B9524 must be installed as shown in the pictures.

8.1 Brake discs, front
Original CCR Mk1/Mk2 discs + New brake update 2018 AP disc, according to appendices 1.1, 1.2. are allowed

8.2 Brake discs, rear
Original CCR Mk1/Mk2 + use of old front disc at the rear, according to appendices 1.1, 1.2 are allowed

8.3 Brake pads
Free

8.4 Brake calipers
The following Howe and Tilton brake calipers are freely interchangeable between the front and rear brake circuits: Howe PN 524312, Howe PN 524314, Howe PN 524316, TLT PN 74875, TLT PN 74-1000.

8.5 Upgrade Parts – Brakes
Original CCR Mk1/Mk2 as per Appendices 1.1, 1.2. New PF140 brake package is permitted as per Appendices 1.1, 1.2.

9.0 Frame / Bodywork

9.1 Minimum Height
The minimum height of the cars is not specified in the rules.

9.2 Steering Wheel Free but the use of the CCR Mk1/Mk2 steering wheel hub WQRS is mandatory. A groove for adjusting the steering wheel position in the hub and steering wheel shaft may be made.

9.3 Seat
A seat in accordance with Appendix J of the Motorsport Rule Book 8855-1999 is mandatory. National Supplement 5 year extension for the seat The seat adjustment rails may be removed. The seat must be attached to the original mounting holes and may not be changed or modified.

9.4 Footrest Installing
a custom footrest with pop rivets in the footwell is permitted.

9.5 Frame and body
Heat treatment or straightening of the tubular frame is only permitted by PASAB or by companies approved by the V8Thunder Finland Ry board. Approved companies are: Mäkelä Racing Team / Huoltoasema Mäkelä Ky and Racing Team Lähteenmäki. The repairs made must be documented and approved by the inspection. Straightening and welding of bolted bumper bars is permitted, but the original shape, dimensions and material must be maintained. The material of the splitter plate is free, material thickness minimum 3mm. The rear edge of the plate may extend max. to the front edge of the anti-roll bar. The plate may not extend laterally outside the bumper, the plate may extend forward from the lower edge of the bumper by max. 100mm. The aluminum skid plate under the engine may be extended 150mm back to its original width. Frame and body parts may only be replaced with original CCR Mk1/Mk 2, DTC MB and Audi parts in accordance with appendices 1.1, 1.2, 1.3, 1.4 and 1.5. Two (2) PN B940 grilles may be installed on the bonnet. Cars must be equipped with the following car-specific grille stickers and their modification is prohibited.: Grille / front grille sticker PN PF024 = Camaro. PN MUSTHLD = Mustang PN CHAHLD = Challenger PN 81131-44141 = Camaro Gen.6 PN 81321-44141 = Mustang Gen.6 PN 81131-44141 = MB and Audi PN 81321-44141 = MB and Audi Rear end mask sticker PN PF025, PF026 = Camaro PN MUSTLDR, MUSTLDL, MUSTCAP = Mustang PN CHATLD = Challenger PN 81131-44541 = Camaro Gen.6 PN 81321-44541 = Mustang Gen.6 PN 81131-44541 = MB and Audi PN 81321-44541 = MB and Audi

9.6 Shock absorbers
Front: Öhlins type THF 5R00 or CAX – 971 Rear: Öhlins type THF 6R00 or CAX – 972 Öhlins Auto Norden, Dagvindsgatan 10, 652 22 Karlstad and RallySystems Kellokoski are the official suppliers of Öhlins shock absorbers. In Finland, the authorized service shop for shock absorbers is RallySystems Kellokoski. Maintenance and sealing exclusively by the above-mentioned companies. THF 5R00 and THF 6R00 two bottom paper seals are approved seals. (New pictures added of THF5R00 and THF 6R00 sealing) CAX – 971 and CAX – 972 two bottom paper seals with yellow paint on the top nut are approved seals.

9.7 Springs
Front spring: Öhlins 01092-79 = 190N/mm Öhlins 01092-89 = 210N/mm Öhlins 01092-91 = 230N/mm Front auxiliary spring: Öhlins 05173-07 or 05173-01/KH. Must be installed. Front spring support Öhlins 05281-01 (53/74/19). Must be installed. Rear spring: Öhlins 00698-06 = 44N/mm Öhlins 00698-14 = 60N/mm

9.8 Front anti-roll bar
SC1449HW112 = 1-1/2" according to appendix 1.1, 1.2, 1.3. SC1449HW138 = 1-3/8" according to appendix 1.1, 1.2, 1.3. SC1449HW114 = 1-1/4" according to appendix 1.1, 1.2, 1.3. Not to be removed

9.9 Rear anti-roll bar Original, supplied with the car, diameter = 19mm (3/4"). The stabilizer bar may be removed but not removed

10 Safety equipment

10.1 Roll cage
Classified roll cage model CCR Mk1 / CCR Mk2 in accordance with Appendix 1.1, 1.2, 1.3, 1.4 and 1.5. The frame tubes must be protected at a distance of 50 cm from the driver's head (measurement is made with the driver in his seat, seat belts fastened) With padding in accordance with FIA standard 8857-2001 type A (FIA technical list no. 23)

10.2 Seat belts
6-point seat belts in accordance with FIA 8853-98 or FIA 8853-2016 in accordance with Appendix J of the Motorsport Regulations are mandatory. Nationally, the expiry date may be exceeded by a maximum of five years.

10.3 Extinguishing system
Sparco model 0146EM41A for regular petrol. Lifeline model L-102-400-001 for regular petrol. The system must be in the active state, i.e. can be activated from the driver's seat / by an outsider without removing the safety pin while the car is on the track during practice, qualifying and the race until the parc fermé is dismantled. Sparco 0146EM41A or Lifeline L-102-400-001 extinguishing system is mandatory when the car uses petrol.

10.4 Safety tank
Original CCR Mk1/Mk2 as per Appendix 1.1, 1.2, 1.3.

10.6 Other safety regulations
Unless otherwise stated in these regulations, the 2024 Motor Sport Rule Book shall prevail. Mustang Gen.5 can replace the original driver's side mirror PN 15175-A31 with mirror PN 22548 Longacre to reduce the field of view restriction.

11 Attachments
Liite 1.1 Chevrolet Camaro Gen 5 ja Gen6 Osanr Kuvaus LS3CC LS3CC engine PRE-GLOBAL LS3CC engine by PREFIX E1599 Dry Sump Oil Tank 24255748 Pressure plate & Disc GF4A Transm. GF4A/G101A Special 10702P Frame & Cage Assembly, Perimeter 35803 Front Frame, Camaro Cup 36610 Tail Section B890 Aluminum Interior Incl. Heat Shields 342508 Radiator Duct Work Kit-RR LS3CC 342518 Radiator Duct Work Kit Camaro + Mustang Gen.6 82120CAM Front Bumper Kit, Camaro, includes hood support 8212000 Front Bumper Camaro + Mustang Gen.6 8212100 Front Bumper Hood pin bar Camaro Gen.6 82220CAM Rear Bumper Kit, Camaro 8222200 Rear Bumper Camaro Gen.6 SCA827 Collapsable Steering Shaft WQRS Steering quick release. HE-236 Rack, Woodward Power 17.25" Threaded, .220 t/b, 955 valve, 1.5" cylinder PF046 Rack limiter plate 14720 Rack Spacer 1/4" 14730 Rack Spacer 3/8" T40S P/S Pump Howe PS2005 P/S Pump pulley Howe PS3005 P/S Pump bracket Howe KRC20020650 P/S Pulley LS3CC KRC71410040 P/S Bracket LS3CC PS8302 Power Steering Hose Kit W/Cooler PS501 Power Steering Tank W/Bracket R3315 Sleeve 5/8"x15" Hex Alum. 23285 Tie rod 5/8"-18 LH Inside 23286 Tie rod 5/8"-18 RH Outside 23297 Tie rod inner stud 23298 Tie rod outer stud 31491 Bolt Kit suspension 22320 Ball Joint, Precision Upper 22330 Ball Joint, Stud Only Upper 2213907 Precision Max Upper A-Frame 9.75" 22001 Upper A-Frame Key Kit 60203 A-frame Shims 1/8" 60204 A-frame Shims 3/16" 60205 A-frame Shims ¼" 60206 A-frame Shims 3/8" 60207 A-frame Shims ½" 229617C Lower control arm 22410 Ball Joint, Precision Lower 22430 Ball Joint, Stud Only Lower AU-AM12T Rod end ¾" RH male 22949 Strut arm rod end angled AU-AB12T Rod end ¾" LH male 346104 Spindle, Right 5X5 34610L4 Spindle, Left 5X5 SC1449HW114 Sway bar 1-1/4" SC1449HW138 Sway bar 1-3/8" SC1449HW112 Sway bar 1-1/2" 23925 Bushing Delron for splined swaybar 23926 Swaybar arm Left 23927 Swaybar arm Right 23611 Rear Sway Bar Kit 31180 Panhard Axle Mount Rear Ford 9" 31990 Axle clamp, special for 3" tube 30786 Panhard Assembly 30780 Panhard Mount, Frame 3252 Axle Stops 32009 Winters 9" third link bracket 20613 Wheel Studs rear PF059 Brake uppgrade kit MK2 front. Parts below marked * 36571 Front hubs 5x4,75, Steel Mk2 * 20536 Hub dust cover Mk2 * 20573 Brake rotor hat * 36574 T-nuts for hat * 300-0802 Bolt for T-nut * 36573G Hans cooling gasket * SRS800 Brake blower fan new SRS801 Brake blower fan adapter new SRS002 Fan blower replacemnt SRS004 Engine fan blower replacement CAMSCRMK2 Nose Screen, Camaro 2013 * RE308 Brake cooler nose air duct right * RE308L Brake cooler nose air duct left * RE2034 Brake Hose 4,5" Length 14" * RE2031 Brake air hose-12`length (4m) * RE31000 Brake Air duct box Right Camaro + Mustang Gen.6 RE31000L Brake Air duct box Left Camaro + Mustang Gen.6 RE31000SCR Brake Screen Camaro + Mustang Gen.6 B941L Brake fan mount Left Pro syst * B941 Brake fan mount Right Pro syst * 205500 Front Hubs, 5X4.75, Steel Mk1 20538 Hub Dust Cover Mk1 205700 Rear Hubs 5x4,75 Steel 20547 Drive flange 9" ALL44122 Wheel spacer 9" TG3001-33 Axle gundrilled Left 33" TG3001-37 Axle gundrilled Right 37" RV102 Rear end vent assy 9" KN62-1460 Filter for vent tank 32258 Axle tube seal 9" QDR1 Quafie ATB Diff. CCRMK1/Winters Rear axle 9" W95590 Winters 9" housing with axle tubes WA94303 Winters 9" center section HUR114-7494 Shift Boot Hurst PM8182 Alternator 75A RE200 Naca duct single hole KRC40140640 Alernator pulley LS3CC E115 Alternator pulley high rpm LS3CC GDY4060720 Drive belt LS3CC GDY4060725 Drive belt to T40S P/S pump E113 Alternator bracket LS3CC E7015 ECM mount LS3CC PF062 GM ECM LS3CC E7016 Engine wire harness LS3CC 9026, 9027 Engine Skid Pan R100 Engine spacer ¼" R1005 Engine spacer ½" E15910 Engine vent tank for valve covers LS3CC E1597 Oil filter block off line adapter LS3CC 82892 Hydr. Bearing line and bleed kit incl. coupler QM188545 Drive Shaft, Yoke 243950 Drive shaft steel 280 U-Joint Serve Duty Out of production. 529 U-Joint, Heavy duty Spicer Ford 9" 329-10 Drive Shafts U-Bolts 9" 369YOKE Machined Yoke 36299, 36299L Motor mounts front LS3CC 3611 Motor Mounts, Left 3613 Motor Mounts. Right ATM2271 Water temp fitting at water pump 3/8" NPT LS3CC 58982 Rad. Hose reducer 1,75" to 1,5" LS3CC 58981 Rad. Hose reducer 1,5" to 1,25" LS3CC 342411 Vertical surge tank LS3CC 28474 ,75" Dia. 90° hose from surge tank to water pump LS3CC HRP90150 1,5" 90° blue hose LS3CC HRP45175 1,75" 45° blue hose LS3CC 34312 Rad. Hose connector 3,5" Long (1 of 1,5" dia.) LS3CC 34322 Rad. Hose connector 4" Long (1 of 1,75") LS3CC 34129C10 Radiator, W/Oil Cooler 34129C10NF Radiator, W/Oil Cooler no radiator cap 3427 Radiator Cap 3426 Spool thermostat replacement 34221 Radiator Hoses, Overflow Tank & Lines 342026 Upper Radiator Mount, Left 342027 Upper Radiator Mount, Right M162K Fan, electric 16" pull MFA104 Fan, mounting kit CAN22625 Remote Oil Filter Mount E3005 Engine Oil Filter Line Kit LS3CC E1599 Dry sump oil tank LS3CC E164 Dry sump oil tank mounting brackets and straps LS3CC E165 Dry sump oil tank heat shield LS3CC 50-625-7612 Engine Oil cooler in Air box 7,5"x11" LS3CC 22-M22AN10-SE Setrab Cooler fitting E166 Engine Oil cooler mount LS3CC GS1003-12 Seals It gasket 21044 SLP Air box LS3CC 25166571 Plastic GM filter mount LS3CC 25042562 Air filter GM/AC Delco E146 Alum.angle filter box mount LS3CC E7004 20° 3,5" elbow LS3CC E7003 3,5" to 4" Hose connector LS3CC E145 Air deflector LS3CC H11213C New headers LS3CC narrower chassi clearance LS3CC H2024C Y-pip LS3CC 3,5" to 3,5" LS3CC B907 catalytic convertor heat shield H3032 Exhaust Hanger Centred Around catalytic Converter H3031 Muffler / Exhaust Hanger Rear H3028 Exhaust Hanger Rubber HPFC300 Stainless Exhaust band clamp 3" PF140 Brake Upgrade kit 2018. Below parts marked # CP9660-3S4L AP Caliper. 6 Piston Front Left # CP9660-2S4L AP Caliper. 6 Piston Front Right # CCA029660-355 AP Caliper bracket # BCA0212x2286B Rotor hat (Bell) # CP2494-589K12 Rotor bolt kit front # FKCA029660 Fitting kit AP brakes # 120-6387-RS Wilwood Caliper, 6 Piston, Front. Out of production. 120-6388-RS Wilwood Caliper, 6 Piston, Front. Out of production. 120-8283L Wilwood Caliper, 4 Piston, Rear 120-8283R Wilwood Caliper, 4 Piston, Rear 120-11127 Wilwood Caliper, 4 Piston Rear L&R 120-11125 Wilwood Caliper, 4 Piston. Rear L&R CCA0511127310 Caliper bracket # 340910 Cast clamp on bracket 9" B716SHCS Caliper bolts CP5772-1137RA Rotor, Directional Left. AP Front CP5772-1136RA Rotor, Directional Right. AP Front CP1901727 Rotor, Directional Left, AP Front and Rear. CP1901726 Rotor, Directional Right, AP Front and Rear. CP1901782 Rotor, Directional RH AP Rear CP1901783 Rotor, Directional LH AP Rear B926 Brake Cooler plastic holder B931 Caliper cooler mount 3383219 Brake Line 21" w/90* fitting 338326 Brake Line 26" FBM2511 Brake Line Fitting 33791 Brake Line Fitting 80171 Painless Brake Light Switch RT-RD24 Tail Lights, 70 x 118 mm LED Aftermarket B925 Tail Lights bracket B92500 Tail Light bracket outer Camaro Gen.6 B92500I Tail Light bracket Inner Camaro Gen.6 TLT74-875 Master Cylinder 7/8" TLT74-1000 Master Cylinder 1" TLT74-200 Fitting Plastic TLT74-208 Master Cyl. Clamp 524312 Master Cylinder, Remote Reservoir 3/4" 524314 Master Cylinder, Remote Reservoir 7/8" 524316 Master Cylinder, Remote Reservoir 1" 524312K Master Cyl. O-ring repair ¾" 524314K Master Cyl. O-ring repair 7/8" 524316K Master Cyl. O-ring repair 1" AU12685 Master Cylinder Hose Clamp RD109 Master Cylinder Hose 5/16" 524353 Master Cylinder Fitting B9524 Master Cyl. Reservoir Heat Shield CP0805420 Master Cylinder Reservoir, Double Port CP0805424 Master Cylinder Reservoir, Single Port CP2293-48 Bellows for Master Cylinder Reservoir 524361 Master Alum. Cyl. Reservoir Double port 524360 Master Alum. Cyl. Reservoir Singel port 33814 Braided #4 line 33815 Braided #4 line BR11078 1/8 npt to 3/16 inverted flare 90* WW260-1874 Residual Valve 2# 52692 Pedal, Brake Floor Mounted 52992 Pedal, Clutch Floor Mounted 52591 Clutch Pedal Stop 5299 Dead Pedal WW340-4990 Brake Bias Adjuster 72560 90* Bias Adjuster TC1000LS1 Throttle Cable LS3CC 52502 Engine mount for throttle cable LS3CC 5237 Pedal, Gas 52351 Throttle Stop OP-11B Fuel Cell bracket 13202 Fuel Filler 13202B Fuel Filler bracket RE103 Fuel Filler neck top mount Camaro + Mustang Gen.6 RF102 Fuel hose clear 2-1/4" RF215 Fuel Line Kit LS3CC RUS644120 Fitting for fuel rail inlet LS3CC PC122F-EFI Fuel cell w/internal pump LS3CC PC122F-B Fuel Cell Bladder HP1200 Fuel filter replacement LS3CC HP2010B Fuel filter mount LS3CC FSC1 Fuel Safe pump in tank kit LS3CC FPHP El. Fuel pump LS3CC 9120 battery heat shield E5495 Battery shut off switch 4 post MOR74102 Battery shut off switch 4 post 300 Amp. RRCWH Chassis Wiring Harness E4407T Guage Panel, W/Tach E3316 Fuel Level Guage KS210-10 Fuel Level Sender E3563 Fuel Pressure Gauge LS3CC B902CC Switch Panel W/Accessory B902LCC Switch Panel Cover B908 Dash panel cover plate B913 Dash panel cover plate spacer B914 Defogger Diffuser Box B9140 Defogger blower bracket RE195 Defogger Fan B930 Ignition mounting plate RF125A Heat Shield, Extreme Temperature RF126A Heat Shield, Standard Grade RF127A Roll Aluminum Sealant Tape B915 Heat Shield Behind Driver Seat B80190 Windsheild Tear off B80191 Windsheild Tear off Camaro + Mustang Gen.6 65030 Roll Bar Padding BCS155601 Roll Bar Padding FIA Type A 465-1004 ¼" Cable clamps 465-1006 3/8" Cable clamps 465-1014 1" Cable clamps 22534 Rearview Mirror 81131-106 Body, Camaro 2016 Gen.6,Incl. Front & Rear Windows. 81131-31013 Deck Lid 81131-21013R Door Right 81131-21713L Door Left Upper Gen.6 81131-21813L Door Left Lower Gen.6 81131-45012 Bumper cover rear 81132-41212 Nose, upper 81002-41112 Nose. Lower 81132-23013R Fender right front 81132-23013L Fender left front 81131-51312 Greenhouse section front 81131-51512 Greenhouse section rear 81131-33012 Hood 81132-27313R Quarter panel right 81132-27313L Quarter panel left 81131-65243R Windows quarter right 81131-65243L Windows quarter left 81131-61243 Window rear 81131-63343 Window front 81131-76333 Windsheild brace Gen.6 81131-76133 Window brace rear Gen.6 81131-44541 Decal Tail light Gen.6 81131-44141 Decal Nose Gen.6 81001-46433B Nose Screen Camaro + Mustang Gen.6 407500 Rocker Panel Right Gen.6 407600 Rocker Panel Left Gen.6 B92100 Vent Window Right Gen.6 B92200 Vent Window Left Gen.6 B92800 Window brace bracket R + L Gen.6 CAM2010 Body, Camaro 2010 Includes Front & Rear Windows. 40035 Left side opening door mechanism "Safety opening" 40036 Left side opening door hardware B1017 Hood Pins, Pair, CAMSCR Nose Screen, Camaro 2010 CAMDLB Deck Lid Bracket and Hinge Assy, Camaro AS-105552 V-SPEC Wing AA-100038 Wing sideplate carbon B917 Splitter B917M16 Splitter Camaro + Mustang Gen.6 B9171 Splitter Pinch plate B918 Splitter brace FS807-3 Splitter adj. braces PF050 Upper brake light Led PF024 Decal Camaro head light and front grill PF025 Decal Camaro rear light right PF026 Decal Camaro rear light left CAMIFL Extended Inner Fender behind front tire Left CAMIFR Extended Inner Fender behind front tire Right CAMBB Front and Rear Roof Support Brackets 4001 Window Net 40020 Window Net mount lower 40025 Latch Bar to net WM KIT AFI Wiper Kit AM2301353 Wiper motor to AFI AM3022160 Wiper blade to AFI B904CC Window Ledge Right FS805 Window Installation Kit B800C Window Braces B800CR Window Brace rear B1017A Trunk Fasteners, Pair PF027 Tow Straps 9020 Tow Hook Camaro + Mustang Gen.6 PF045 Tow decal B927 Jack post plate B928 Window brace bracket B929 Exhaust exit flange plate B9205C Side view mirror right B9195C Side view mirror left B91900 Mirror Spacer left to fit B9195C on Gen.6 B92000 Mirror Spacer right to fit B9205C on Gen.6 919 Mirror bracket left side B920 Mirror bracket right side 90181 Ready made body mounts 90182 Ready made body mounts B940 Lowers on Hood. 4011CAM Hood, Camaro 4015CAM Trunk, Camaro 4040CAM Quarter Panel, Right, Camaro 4041CAM Quarter Panel, Left, Camaro 4042CAM Rear Cover, Right, Camaro 4043CAM Rear Cover, Left, Camaro 4044CAM Rear Cover, Center Diffuser, Camaro B422W Nose Plastic Camaro Right + Left 4072CAM Fender, Right, Camaro 4073CAM Fender, Left, Camaro 4080CAM Door, Right, Camaro 4081CAM Door, Left, Camaro 40810CAM Door, Left Camaro Lower 40815CAM Door, Right Camaro Upper 40820CAM Roof, Rear Section, Camaro 40821CAM Tray, Rear Window, Camaro 4082CAM Roof, Front Section, Camaro B8019 Front Window, cut, drilled and Blackout. B923 Rear Window, cut, drilled and Blackout. B921 Quarter Window, R/S B922 Quarter Window, L/S B924 Quarter Panel Brace B932 Upper Hood support Right. B93200R Upper Hood support Right Gen.6 B932L Upper Hood support Left. B93200L Upper Hood support Left Gen.6 0146EM41A Fire exthinguiser L-102-400-001 Fire system Life Line 493 Sliding rail ALL14190 Ballast Stud & Nut. Only to Camaro + Mustang Gen.6 ALL14197 Ballast Bracket. Only to Camaro + Mustang Gen.6 PF129 Ballast Round Bar. Only to Camaro + Mustang Gen6 1.1 Ford Mustang Gen.5 – Gen.6 LS3CC LS3CC engine PRE-GLOBAL LS3CC engine by PREFIX E1599 Dry Sump Oil Tank 24255748 Pressure plate & Disc GF4A Transm. GF4A/G101A Special 10702P Frame & Cage Assembly, Perimeter 35803 Front Frame, Camaro Cup 36610 Tail Section B890 Aluminum Interior, Incl Heat Shields 342506 Radiator Duct Work Kit-RR Mustang 342518 Radiator Duct Work Kit. Mustang + Camaro Gen.6 82120M Front Bumper Kit, Mustang, includes hood support 8212000 Front Bumper Mustang + Camaro Gen.6 8212101 Front Bumper Hood Pin bar Gen.6 82220M Rear Bumper Kit, Mustang 8222202 Rear Bumper Gen.6 SCA827 Collapsable Steering Shaft WQRS Steering quick release HE-236 Rack, Woodward Power 17.25" Threaded, .220 t/b, 955 valve, 1.5" cylinder PF046 Rack limiter plate 14720 Rack Spacer 1/4" 14730 Rack Spacer 3/8" T40S P/S Pump Howe PS2005 P/S Pump pulley Howe PS3005 P/S Pump bracket Howe KRC20020650 P/S Pulley LS3CC KRC71410040 P/S Bracket LS3CC PS8302 Power Steering Hose Kit W/Cooler PS501 Power Steering Tank W/Bracket R3315 Sleeve 5/8"x15" Hex Alum. 23285 Tie rod 5/8"-18 LH Inside 23286 Tie rod 5/8"-18 RH Outside 23297 Tie rod inner stud 23298 Tie rod outer stud. 31491 Bolt Kit suspension 22320 Ball Joint, Precision Upper 22330 Ball Joint, Stud Only Upper 2213907 Precision Max Upper A-Frame 9.75" 22001 Upper A-Frame Key Kit 60203 A-frame Shims 1/8" 60204 A-frame Shims 3/16" 60205 A-frame Shims ¼" 60206 A-frame Shims 3/8" 60207 A-frame Shims ½" 229617C Lower control arm 22410 Ball Joint, Precision Lower 22430 Ball Joint, Stud Only Lower AU-AM12T Rod end ¾" RH male 22949 Strut arm rod end angled AU-AB12T Rod end ¾" LH male 346104 Spindle, Right 5X5 34610L4 Spindle, Left 5X5 SC1449HW114 Sway bar 1-1/4" SC1449HW138 Sway bar 1-3/8" SC1449HW112 Sway bar 1-1/2" 23925 Bushing Delron for splined swaybar 23926 Swaybar arm Left 23927 Swaybar arm Right 23611 Rear Sway Bar Kit 31180 Panhard Axle Mount Rear Ford 9" 31990 Axle clamp, special for 3" tube 30786 Panhard Assembly 30780 Panhard Mount, Frame 3252 Axle Stops 32009 Winters 9" third link bracket 20613 Wheel Studs rear PF059 Brake upgrade kit MK2 front. Parts below marked * 36571 Front hubs 5x4,75 Steel mk2 * 20536 Hub dust cover mk2 * 20573 Brake rotor hat * 36574 T-nuts for hat * 300-0802 Bolt for T-nut * 36573G Hans cooling gasket * SRS800 Brake blower fan new. SRS801 Brake blower fan adapter new. SRS002 Fan blower replacement SRS004 Engine fan blower replacement RE307 Brake duct inlet box right * RE307L Brake duct inlet box left * RE307Det1 Brake duct inlet 4,5" hose & 3" hose * RE2034 Brake air hose 4,5" Length 14" * RE2031 Brake air hose 3", 12` length (4m) * RE31000 Brake Air duct box Right Mustang + Camaro Gen.6 RE31000L Brake Air duct box Left Mustang + Camaro Gen.6 RE31000SCR Brake Screen Mustang + Camaro Gen.6 B941L Brake fan mount Left Pro syst. * B941 Brake fan mount Right Prio syst. * 205500 Front hubs 5x4,75" Steel Mk1 20538 Hub dust cover Mk1 205700 Rear Hubs 5x4,75 Steel 20547 Drive flange 9" 44122 Wheel spacer 9" TG3001-33 Axle gundrilled Left 33" TG3001-37 Axle gundrilled Right 37" RV102 Rear end vent assy 9" KN62-1460 Filter for vent tank 32258 Axle tube seal 9" QDR1 Quafie ATB Diff. CCRMK1/Winters Rear axle 9" W95590 Winters 9" housing with axle tubes WA94303 Winters 9" center section HUR114-7494 Shift Boot Hurst PM8182 Alternator 75A RE200 Naca duct single hole KRC40140640 Alternator pulley LS3CC E115 Alternator pulley high rpm LS3CC GDY4060720 Drive belt LS3CC GDY4060725 Drive belt to P/S pump T40S E113 Alternator bracket LS3CC E7015 ECM mount LS3CC PF062 GM ECM LS3CC E7016 Engine wire harness LS3CC 9026, 9027 Engine Skid Pan R100 Engine spacer ¼" R1005 Engine spacer ½" E15910 Engine vent tank for valve covers LS3CC E1597 Oil filter block off line adapter LS3CC 82892 Hydr. Bearing line and bleed kit incl. coupler QM188395 Drive Shaft, Aluminum 39.5" Out of production. QM188545 Drive Shaft, Yoke 243950 Drive shaft steel 280 U-Joint Serve Duty Out of production. 529 U-Joint, Heavy duty spicer Ford 9" 329-10 Drive Shafts U-Bolts 9" 369YOKE Machined Yoke 36299, 36299L Motor mounts front LS3CC 3611 Motor Mounts, Left 3613 Motor mounts, Right ATM2271 Water temp fitting at water pump 3/8" NPT LS3CC 58982 Rad. Hose reducer 1,75" to 1,5" LS3CC 58981 Rad. Hose reducer 1,5" to 1,25" LS3CC 342411 Vertical surge tank LS3CC 28474 ,75" Dia. 90° hose from surge tank to water pump LS3CC HRP90150 1,5" 90° blue hose LS3CC HRP45175 1,75" 45° blue hose LS3CC 34312 Rad. Hose connector 3,5" Long (1 of 1,5" dia.) LS3CC 34322 Rad. Hose connector 4" Long (1 of 1,75") LS3CC 34129C10 Radiator, W/Oil Cooler 34129C10NF Radiator,W/Oil Cooler no radiator cap. 3427 Radiator Cap 3426 Spoole Thermostat replacement 34221 Radiator Hoses, Overflow Tank & Lines 342026 Upper Radiator Mount, Left 342027 Upper Radiator Mount, Right M162K Fan, electric 16" pull MFA104 Fan, mounting kit CAN22625 Remote Oil Filter Mount E3005 Engine Oil Filter Line Kit LS3CC E1599 Dry sump oil tank LS3CC E164 Dry sump oil tank mounting brackets and straps LS3CC E165 Dry sump oil tank heat shield LS3CC 50-625-7612 Engine Oil cooler in Air box 7,5"x11" LS3CC 22-M22AN10-SE Setrab cooler fitting E166 Engine Oil cooler mount LS3CC GS1003-12 Seals IT gasket 21044 SLP Air box LS3CC 25166571 Plastic GM filter mount LS3CC 25042562 Air filter GM/Ac Delco E146 Alum. Angle filter box mount LS3CC E7004 20° 3,5" elbow LS3CC E7003 3,5" to 4" Hose connector LS3CC E145 Air deflector LS3CC H11213C New headers LS3CC narrower chassi clearance H2024C Y-pip LS3CC 3,5" to 3,5" LS3CC B907 catalityc convertor heat shield H3032 Exhaust Hanger Center Around catalytic Converter H3031 Muffler / Exhaust Hanger Rear H3028 Exhaust Hanger Rubber HPFC300 Stainless Exhaust band clamp 3" PF140 Brake upgrade kit 2018. Below parts marked # CP9660-3S4L AP Caliper, 6 Piston Front Left # CP9660-2S4L AP Caliper, 6 Piston Front Right # CCA029660-355 AP Caliper bracket # BCA0212x2286B Rotor hat (Bell) # CP2494-589K12 Rotor bolt kit front # FKCA029660 Fitting kit AP brakes # 120-8283L Wilwood Caliper, 4 Piston, Rear 120-8283R Wilwood Caliper, 4 Piston, Rear 120-11127 Wilwood Caliper, 4 Piston. Rear L&R # 120-11125 Wilwood Caliper, 4 Piston. Rear L&R CCA0511127310 Caliper bracket # 340910 Cast clamp on bracket 9" B716SHCS Caliper bolts CP5772-1137RA Rotor. Directional Left AP Front # CP5772-1136RA Rotor. Directional Right AP Front # CP1901727 Rotor, Directional Left, AP Front and Rear. CP1901726 Rotor, Directional Right, AP Front and Rear. CP1901782 Rotor, Directional RH AP Rear CP1901783 Rotor, Directional LH AP Rear B926 Brake Cooler plastic holder B931 Caliper cooler mount 3383219 Brake Line 21" w/90* fitting 338326 Brake Line 26" FBM2511 Brake Line Fitting 33791 Brake Line Fitting 80171 Painless Brake Light Switch RT-RD24 Tail Lights, 70 x 118 mm LED Aftermarket B925M Tail Light bracket B92501 Tail Light bracket Gen.6 TLT74-875 Master Cylinder 7/8" TLT74-1000 Master Cylinder 1" TLT74-200 Fitting Plastic TLT74-208 Master cyl. Clamp 524312 Master Cylinder, Remote Reservoir 3/4" 524314 Master Cylinder, Remote Reservoir 7/8" 524316 Master Cylinder, Remote Reservoir 1" 524312K Master Cyl. O-ring repair ¾" 524314K Master Cyl. O-ring repair 7/8" 524316K Master Cyl. O-ring 1" AU12685 Master Cylinder Hose Clamp RD109 Master Cylinder Hose 524353 Master Cylinder Fitting B9524 Master Cyl. Reservoir heat 6hield CP0805420 Master Cylinder Reservoir, Double Port CP0805424 Master Cylinder Reservoir, Single Port CP2293-48 Bellows for Master Cylinder Reservoir 524361 Master Alum. Cyl. Reservoir Double port 524360 Master Alum. Cyl. Reservoir Singlw port 33814 Braided #4 line 33815 Braided #4 line BR11078 1/8 npt to 3/16 inverted flare 90* WW260-1874 Residual Valve 2# 52692 Pedal, Brake Floor Mounted 52992 Pedal, Clutch Floor Mounted 52591 Clutch Pedal Stop 5299 Dead Pedal WW340-4990 Brake Bias Adjuster 72560 90* Bias Adjuster TC1000LS1 Throttle Cable LS3CC 52502 Engine mount for throttle cable LS3CC 5237 Pedal, Gas 52351 Throttle Stop OP-11B Fuel Cell bracket 13202 Fuel Filler RE103 Filler Neck Top mount Mustang + Camaro Gen.6 RF102 Fuel hose clear 2-1/4" 13202B Fuel Filler bracket RF215 Fuel Line Kit LS3CC RUS644120 Fitting for fuel rail inlet LS3CC PC122F-EFI Fuel cell w/internal pump LS3CC PC122F-B Fuel Cell Bladder HP1200 Fuel filter replacement LS3CC HP2010B Fuel filter mount LS3CC FSC1 Fuel Safe pump in tank kit LS3CC FPHP El. Fuel Pump LS3CC 9120 battery heat shield E5495 Battery shut off switch 4 post MOR74102 Battery shut off switch 4 post 300Amp RRCWH Chassis Wiring Harness E4407T Guage Panel, W/Tach E3316 Fuel Level Guage KS210-10 Fuel Level Sender E3563 Fuel Pressure Gauge LS3CC B902CC Switch Panel W/Accessory B902LCC Switch Panel Cover B908 Dash panel cover plate B913 Dash panel cover plate spacer B914 Defogger Diffuser Box B9140 Defogger blower bracket RE195 Defogger Fan B930 Ignition mounting plate RF125A Heat Shield, Extreme Temperature RF126A Heat Shield, Standard Grade RF127A Roll Aluminum Sealant Tape B915 Heat Shield Behind Driver Seat B80190 Windsheild Tear off B80191 Windsheid Tear off Mustang + Camaro Gen.6 65030 Roll Bar Padding BCS155601 Roll Bar Padding FIA Type A 465-1004 ¼" Cable clamps 465-1006 3/8" Cable clamps 465-1014 1" Cable clamps 22534 Rearview Mirror 81321-106 Body, Mustang 2016 Gen.6, Incl. Front & Rear windows. 81321-31013 Deck Lid 81321-21013R Door Right 81321-21713L Door Left Upper 81321-21813L Door Left Lower 81321-4501 Bumper Cover rear 81321-41212 Nose, upper 81001-41112 Nose, Lower 81322-23013R Fender right front 81322-23013L Fender left front 81321-51312 Greenhouse section, front 81321-51512 Greenhouse section, rear 81321-33012 Hood 81322-27313R Quarter panel right 81322-27313L Quarter panel left 81321-65243R Windows quarter right 81321-65243L Windows quarter left 81321-61243 Window rear 81321-63343 Window front 81321-76333 Windshield brace 81321-76133 Window brace rear 81321-44541 Decal Tail light 81321-44141 Decal Nose kit 81001-46433B Nose Screen Mustang + Camaro Gen.6 407501 Rocker Panel Right 407601 Rocker Panel Left B92101 Vent Window Right B92201 Vent Window Left B92801 Window Brace Bracket L+R 4403 Body, Mustang 2013 ,Includes Front & Rear Windows. 40036 Left side opening door hardware MICP Interior crush panel conversion kit B1017 Hood Pins, Pair, MUSSCR Nose Screen, Mustang lower MUSSCRUPR Nose Screen, Mustang Upper MUSDLB Deck Lid Bracket and Hinge Assy, Mustang AS-105552 V-SPEC Wing AA-100038 Wing sideplate carbon B917M Splitter Mustang B917M16 Splitter Mustang + Camaro Gen.6 B9171 Splitter pinch plate B918 Splitter brace FS807-3 Splitter adj. Braces PF050 Upper brake light Led MUSTHLD Decal Mustang head light and front grill MUSTLDR Decal Mustang rear light, right MUSTLDL Decal Mustang rear light, left MUSTCAP Decal Mustang gas cap MUSIFL Extended Inner Fender behind front tire Left Mustang MUSIFR Extended Inner Fender behind front tire Right Mustang MUSBB Front and Rear Roof Support Brackets Mustang 4001 Window Net 40020 Window Net mount lower 40025 Latch bar to net. WM KIT AFI Wiper Kit AM2301353 Wiper Motor to AFI AM3022160 Wiper Blade to AFI FS805 Window Installation Kit B800M Window Braces Mustang B800MR Window Brace rear Mustang B1017A Trunk Fasteners, Pair PF027 Tow Straps 9020 Tow Hook Mustang + Camaro Gen.6 P045 Tow decal B927 Jack post plate B928M Front Window brace bracket Mustang B929M Exhaust exit flange plate Mustang 15175-A32 Side view mirror right Mustang 15175-A31 Side view mirror left Mustang B9205M Side view mirror right Gen.6 B9195M Side view mirror left Gen.6 B91921 Mirror bracket L. Camaro mirror on Mustang Gen.6 B92021 Mirror bracket R. Camaro mirror on Mustang Gen.6 B91931 Mirror spacer L. Camaro mirror on Mustang Gen.6 B92031 Mirror spacer R. Camaro mirror on Mustang Gen.6 B9195C Side view mirror L. Camaro to Mustang Gen.6 only. B9205C Side view mirror R. Camaro to Mustang Gen.6 only. 22549 Side view mirror left Nascar Mustang B919M Mirror bracket left side Mustang B920M Mirror bracket right side Mustang B932M Cowl support right Mustang B932ML Cowl support left Mustang B93201L Upper Hood support Left Gen.6 B93201R Upper Hood support Right Gen.6 90181 Ready made body mounts 90182 Ready made body mounts B940 Lowers on Hood 4011M Hood, Mustang 4015M Trunk, Mustang 4040M Quarter Panel, Right, Mustang 4041M Quarter Panel, Left, Mustang 4042M Rear Cover, Right, Mustang 4043M Rear Cover, Left, Mustang 4044M Rear Cover, Center Diffuser, Mustang 4045M Nose fiberglas R Mustang 4046M Nose fiberglas L Mustang 4072M Fender, Right, Mustang 4073M Fender, Left, Mustang 4080M Door, Right, Mustang 4081M Door, Left, Mustang 40810M Door Left Mustang Lower 40815M Door Left Mustang Upper 40820M Rear deck filler Mustang 4082M Roof front Mustang B8019M Front Window, cut, drilled and Blackout. Mustang B923M Rear Window, cut, drilled and Blackout. Mustang B921M Quarter Window, R Mustang B922M Quarter Window, L Mustang 493 Sliding rail 0146EM41A Fire Exthinguiser L-102-400-001 Fire system Life Line ALL14190 Ballast stud & nut. Only to Mustang + Camaro Gen.6 ALL14197 Ballast bracket. Only to Mustang + Camaro Gen.6 PF129 Ballast round bar. Only to Mustang + Camaro Gen.6 11.4 Liite 1.4 MB C63 AMG autoon luokitellut varaosat varaosanumeroin 99 4011AMG Hood AMG 99 4015-1AMG Gurney AMG 99 4015AMG Rear Deck Lid AMG 99 4040AMG Right Quarter Panel AMG 99 4041AMG Left Quarter Panel AMG 99 4042AMG Rear Bumper Cover AMG 99 4045AMG Lower Nose AMG 99 4046AMG Upper Nose AMG 99 4072AMG Right Fender AMG 99 4073AMG Left Fender AMG 99 4080AMG Right Door AMG 99 40811AMG Left Door Lower AMG 99 40815AMG Left Door Upper AMG 99 40820AMG Rear Greenhouse AMG 99 4082AMG Front Greenhouse New, AMG 99 8212000AMG Front Bumper Kit, AMG 99 8212100AMG Front Bumper Hood Pin Bar, AMG 99 8212110AMG Front Bumper Side Pin set, AMG 99 8222200AMG Rear Bumper Kit, AMG 99 91917AMG Rear Deck Support, AMG 99 AMGHLD DECAL H. LIGHT AND FRONT GRIILL AMG 99 AMGTLDL DECAL REAR LIGHT, LEFT AMG 99 AMGTLDR DECAL REAR LIGHT, RIGHT AMG 99 B800AMG Window Braces Front AMG 99 B800AMGR Window Braces Rear AMG 99 B8019AMG Front Windshield New, AMG 99 B91940AMG Mirror Bracket/ Door Support L/S AMG 99 B92040AMG Mirror Bracket/ Door Support R/S AMG 99 B92100AMG Vent Window R/S AMG 99 B921AMG Right Quarter Window AMG 99 B92200AMG Vent Window L/S AMG 99 B922AMG Left Quarter Window AMG 99 B923AMG Rear Window AMG 99 B92400AMG Front and Rear / Roof / Side Bracket AMG 99 B9280FAMG Window Brace Bracket Front AMG 99 B9280FLAMG Window Brace Bracket Front LH AMG 11.4 Liite 1.5 Audi RS5 autoon luokitellut varaosat varaosanumeroin 99 4011RS Hood RS 99 4015-1RS Gurney RS 99 4015RS Rear Deck Lid RS 99 4040RS Right Quarter Panel RS 99 4041RS Left Quarter Panel RS 99 4042RS Rear Bumper Cover RS 99 4045RS Lower Nose RS 99 4046RS Upper Nose RS 99 4072RS Right Fender RS 99 4073RS Left Fender RS 99 4080RS Right Door RS 99 40811RS Left Door Lower RS 99 40815RS Left Door Upper RS 99 40820RS Rear Greenhouse RS 99 4082RS Front Greenhouse New, RS 99 8212000RS Front Bumper Kit, RS 99 8212100RS Front Bumper Hood Pin Bar, RS 99 8212110RS Front Bumper Side Pin set, RS 99 8222200RS Rear Bumper Kit, RS 99 91917RS Rear Deck Support, RS 99 RSHLD DECAL H. LIGHT AND FRONT GRIILL RS 99 RSTLDL DECAL REAR LIGHT, LEFT RS 99 RSTLDR DECAL REAR LIGHT, RIGHT RS 99 B800RS Window Braces Front RS 99 B800RSR Window Braces Rear RS 99 B8019RS Front Windshield New, RS 99 B91940RS Mirror Bracket/ Door Support L/S RS 99 B92040RS Mirror Bracket/ Door Support R/S RS 99 B92100RS Vent Window R/S RS 99 B921RS Right Quarter Window RS 99 B92200RS Vent Window L/S RS 99 B922RS Left Quarter Window RS 99 B923RS Rear Window RS 99 B92400RS Front and Rear / Roof / Side Bracket RS 99 B9280FRS Window Brace Bracket Front RS 99 B9280FLRS Window Brace Bracket Front LH RS